《46》■You can use the USB cable to connect this camera to a printer that supportsPictBridge (sold separately) and print the stored images directly. Movie clips andvoice files cannot be printed.●Connecting the Camera to a Printer1. Slide the power switch to turn the camera power on.2. Use the supplied USB cable to connect the camerato the printer as shown below.3. Turn on the printer to connect the camera to theprinter.4. A window for selecting an external device willdisplay on the LCD monitor.5. Select [PRINTER] menu by pressing the Up/ Down button and press the OKbutton.※ If you selected [COMPUTER] in Step 5, when you connect the camera to yourprinter, the [CONNECTING COMPUTER] message will display and theconnection will not be established. In this case, disconnect the USB cable, andthen follow the procedure from Step 2 and onward.PictBridge PictBridge : Picture Selection■Select pictures to print1. Use the LEFT and RIGHT buttons to select the[IMAGE] menu tab.2. Use the UP and DOWN buttons to select thedesired sub menu value, and then press the OKbutton.When [ONE PIC] is selected: The PictBridge function will be applied only tothe picture currently displayed.When [ALL PICS] is selected: The PictBridge function will be applied to all pictures, excluding movie clipsand voice files.[ When [ONE PIC] is selected ] [ When [ALL PICS] is selected ]- Press the Up/ Down button to select the number of prints. Maximum 30 prints.- When you select [ONE PIC] menu, use the Left/ Right button to select anotherpicture and select the number of prints for another picture.- After setting the number of prints, press the OK button to save.- Press the Shutter button to return to the menu without setting the number ofprints.●Setting the Number of Copies to Print- Select [ONE PIC] or [ALL PICS]. A screen where you can set the number ofcopies to print will appear as shown below.00 PRINTSEXIT:SH00 PRINTSMOVE PIC: SET:OK EXIT:SH SET:OKONE PICALL PICSIMAGESMOVE:CONNECTING PRINTER