《51》Setup menu[ Setting up the Date / Date type ]■ You can change the date that will be displayed on the captured images and setup the date type.● Setting Date & Selecting Date FormatRIGHT button: Selects the year/ month/ day datetype.LEFT button : Moves the cursor to the [DATE] mainmenu if the cursor is at the first itemof the date and time setup. In allother cases, the cursor will be shiftedto the left of its current position.UP and DOWN buttons : Changes the setting value.-Date type : [YY/MM/DD], [DD/MM/YY], [MM/DD/YY], [OFF][ Setting up the time ]■ You can change the time that will be displayed on the captured images.● Setting timeRIGHT button : Selects the hour/ minutetype.UP and DOWN buttons : Changes the setting value.[ Formatting a memory ]■ This is used for formatting the memory. If you run [FORMAT] on the memory,all images already in the memory, including protected images, will be deleted.Be sure to download important images to your PC before formatting the memory.● Sub menus[NO] : The memory will not be formatted.Press the menu button three times and themenu display will disappear.[YES] : A confirmation window will display. Selectthe [FORMAT] message and press the OKbutton. A [PROCESSING!] messageappears and the memory card will beformatted. If you ran FORMAT in Playmode, a [NO IMAGE!] message willappear.※ Be sure to run [FORMAT] on the following types of memory card.- A new memory card, or an unformatted memory card- A memory card that has a file this camera can't recognise or one that hasbeen taken from another camera.※ Always format the memory by using this camera. If you insert a memory cardthat has been formatted by using other cameras, memory card readers, orPCs, you will get a [CARD ERROR!] message.FILEPWR SAVELANGUAGEFORMATNOYESSETUPBACK: SET:OKLANGUAGEFORMATDATETIMESETUPBACK: SET:OK06 / 01 / 01YY/MM/DDFORMATDATETIMEIMPRINTSETUPBACK: SET:OK13 : 00