Samsung DIGIMAX A503 User Manual

Also see for A503 - Digimax 5MP Digital Camera: User manual

Contents

《52》● Sub menus[OFF] : The quick view function can't beactivated.[0.5, 1, 3 SEC]: The captured image is brieflydisplayed during the selected time.[ Quick view ]■ If you enable Quick View before capturing an image, you can view the image youjust captured on the LCD monitor for the duration set in the [Q.VIEW] setup.Quick view is possible only with still images.USBBEEPLCDQ.VIEWOFF0.5SEC1SEC3SECSETUPBACK: SET:OKSetup menu[ BEEP ]■ If you set the operation beep to ON, various beeps will be activated for camerastartup, when buttons are pressed, so that you can be aware of the cameraoperation status.[ LCD brightness ]■ You can adjust the LCD brightness.● [BEEP] sub menu : OFF/ ON[ Imprinting the recording date ]■ There is an option to include DATE/ TIME on stillimages.● Sub menus[OFF] : The DATE & TIME will not beimprinted on the image file.[DATE] : Only the DATE will be imprintedon the image file.[DATE & TIME] : The DATE & TIME will beimprinted on the image file.● [LCD] sub menu : DARK, NORMAL, BRIGHT[ Connecting an External Device (USB) ]■ You can select an external device to which you want to connect the camerausing the USB cable.● Sub menus- [COMPUTER] : Select this if you want to connectthe camera to your PC. Refer topage 62 for instructions on howto connect the camera to yourPC.- [PRINTER] : Select this if you want to connectthe camera to your printer. Referto page 44 for instructions onhow to connect the camera toyour printer.TIMEIMPRINTUSBBEEPOFFONSETUPBACK: SET:OKIMPRINTUSBBEEPLCDDARKNORMALBRIGHTSETUPBACK: SET:OKFORMATDATETIMEIMPRINTOFFDATEDATE &TIMESETUPBACK: SET:OKDATETIMEIMPRINTUSBCOMPUTERPRINTERSETUPBACK: SET:OK