Samsung 5 series User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

19English03 Basic Features■ SPDIF Output: SPDIF (Sony Philips Digital InterFace)is used to provide digital sound, reducing interferencegoing to speakers and various digital devices such as aDVD player.Audio Format: During the reception of a digital TVbroadcast, you can select the Digital Audio output(SPDIF) format from the options PCM or Dolby Digital.✎ By connecting to 5.1ch speakers in a DolbyDigital setup, maximize your interactive 3D soundexperience.Audio Delay: Correct audio-video sync problems, whenwatching TV or video, and when listening to digital audiooutput using an external device such as an AV receiver(0ms ~ 250ms).■ Dolby Digital Comp (Line / RF): This function minimizessignal disparity between a dolby digital signal and avoice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).✎ Select Line to obtain dynamic sound, and RFto reduce the difference between loud and softsounds at night time.Line: Set the output level for signals greater or less than-31dB (reference) to either -20dB or -31dB.RF: Set the output level for signals greater or less than-20dB (reference) to either -10dB or -20dB.Sound Reset (OK / Cancel)Reset all sound settings to the factory defaults.¦ Selecting the Sound ModeWhen you set to Dual f-g, the currentsound mode is displayed on the screen.AudioType Dual f-g DefaultA2StereoMono Mono AutomaticchangeStereo Stereo ↔ MonoDual Dual f ↔ Dual g Dual fNICAMStereoMono Mono AutomaticchangeStereo Mono ↔ StereoDual Mono ↔ Dual f Dual g  Dual f✎ If the stereo signal is weak and an automatic switching,occurs, then switch to the mono.✎ Only activated in stereo sound signal.✎ Only available when the Input source is set to TV.Setup Menu¦ Setting the TimeTime■ Clock: Setting the clock is for using various timerfeatures of the TV.O The current time will appear every time you pressthe INFO button.✎ If you disconnect the power cord, you have to setthe clock again.Clock Mode (Auto / Manual)✎ Depending on the broadcast station and signal,the auto time set up may not be correct. In thiscase, set the time manually.✎ The antenna must be connected in order to setthe time automatically.Clock Set: Set the Day, Month, Year, Hour and Minutemanually.✎ Available only when Clock Mode is set toManual.Time Zone (depending on the country): Select your timezone.✎ When Country is set to Others, you can use thisfunction.✎ This function is only available when theClock Mode is set to Auto.¦ Using the Sleep Timer■ Sleep Timer t: Automatically shuts off the TVafter a preset period of time. (30, 60, 90, 120, 150 and180 minutes).✎ To cancel Sleep Timer, select Off.¦ Setting the On / Off Timer■ Timer 1 / Timer 2 / Timer 3: Three different on / offtimer settings can be made. You must set the clock first.DUALⳒ ⳓ10 TV ATV 100 00▲▼00 00Timer 1On TimeOff TimeVolumeInactivateInactivateSun Mon Tue Wed Thu Fri SatOnceSource Antenna ChannelRepeatL Move U Adjust E Enter R Return