Samsung 5 series User Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

17English03 Basic Features■ Digital Noise Filter (Off / Low / Medium / High / Auto/ Auto Visualisation): When the broadcast signal isweak, some static and ghosting may appear. Select oneof the options until the best picture is displayed.Auto Visualisation: When changing analogue channels,displays the intensity of the current signal and definesthe screen noise filter.✎ Only available for analogue channels.■ MPEG Noise Filter (Off / Low / Medium / High /Auto): Reduces MPEG noise to provide improvedpicture quality.■ HDMI Black Level (Normal / Low): Selects the blacklevel on the screen to adjust the screen depth.✎ Available only in HDMI mode (RGB signals).■ Film Mode (Off / Auto1 / Auto2): Sets the TV toautomatically sense and process film signals from allsources and adjust the picture for optimum quality.✎ Available in TV, AV, COMPONENT (480i / 1080i)and HDMI (480i / 1080i).■ Auto Protection Time (2 hours / 4 hours / 8 hours /10 hours / Off): If the screen remains idle with a stillimage for a certain period of time defined by the user,the screen saver is activated to prevent the formation ofghost images on the screen.Picture Reset (OK / Cancel)Resets your current picture mode to its default settings.¦ Setting up the TV with Your PCSet the input source to PC.Auto Adjustment tAdjust frequency values/positions and fine tune the settingsautomatically.✎ Not available when connecting with an HDMI/DVI cable.Screen■ Coarse / Fine: Removes or reduces picture noise. If thenoise is not removed by Fine-tuning alone, then adjustthe frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjustthe picture so that it is aligned to the centre of screen.■ Position: Adjust the PC screen position with directionbutton (▲ / ▼ / ◄ / ►).■ Image Reset: Resets the image to default settings.Using Your TV as a Computer (PC) DisplaySetting Up Your PC Software (Based on Windows XP)Depending on the version of Windows and the video card,the actual screens on your PC may differ in which case thesame basic set-up information will almost always be applied.(If not, contact your computer manufacturer or SamsungDealer.)1. Click on “Control Panel” on the Windows start menu.2. Click on “Appearance and Themes” in the “ControlPanel” window and a display dialog-box will appear.3. Click on “Display” and a display dialog box will appear.4. Navigate to the “Settings” tab on the display dialog-box.y The correct size setting (resolution) [Optimum: 1920 X1080 pixels]y If a vertical-frequency option exists on your displaysettings dialog box, the correct value is “60” or “60 Hz”.Otherwise, just click “OK” and exit the dialog box.Sound Menu¦ Changing the Preset Sound ModeMode■ Standard: Selects the normal soundmode.■ Music: Emphasizes music over voices.■ Movie: Provides the best sound formovies.■ Clear Voice: Emphasizes voices over other sounds.■ Amplify: Increase the intensity of high-frequency soundto allow a better listening experience for the hearingimpaired.S.MODE