English - Connecting to a Cable Box that Descrambles Some ChannelsIf your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.). Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.This terminal might be labeled ‘ANT IN’, ‘VHF IN’ or simply, ‘IN’.. Connect this cable to a two-way splitter.. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.. Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.. Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANt IN terminal on the rear of the TV.After you have made this connection, set the A/B switch to the ‘A’ position for normal viewing. Set the A/B switch to the ‘B’position to view scrambled channels. (When you set the A/B switch to ‘B’, you will need to tune your TV to the cable box’soutput channel, which is usually channel 3 or 4.)Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-top Box) via hDMIThis connection can only be made if there is an HDMI Output connector on the external device.. Connect an HDMI Cable between the hDMI IN (DVI), or jack on the TV and the HDMI jack on the DVD / Blu-ray Playeror Cable Box / Satellite receiver (Set-Top Box).What is HDMI?HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signalsusing a single cable.The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth DigitalCopy Protection) coding feature installed.Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.❑N¦N●●NDVD / Blu-ray player / Cable Box /Satellite receiver (Set-top Box) tV Side PaneltV Rear Panelor1 hDMI Cable (Not supplied)SplitterCable BoxIncoming cabletV RearANt INRf (A/B) Switch