Menu
Samsung 5 series User Manual
Also see for 5 Series: Quick setup guideQuick setup guideQuick setup guideQuick start guideUser manual
                                                                   | |
Contents
|
English - Listening through a Receiver (home theater)You can listen to sound through a receiver instead of the TV speaker.. Press the tOOLS button. Press the ENtERE button to select Anynet+ (hDMI-CEC).. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.. Press the ExIt button to exit.If your receiver supports audio only, it may not appear in the device list.If there is a power interruption to the TV when the Receiver is set to On (by disconnecting thepower cord or a power failure), the Speaker Select may be set to External Speaker when you turnthe TV on again.troubleshooting for Anynet+Problem Possible SolutionAnynet+ does not work. Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+devices only.Connect only one receiver (home theater).Check if the Anynet+ device power cord is properly connected.Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.Check whether the TV remote control is in TV mode.Check whether it is Anynet+ exclusive remote control.Anynet+ doesn’t work in certain situations. (Searching channels, Operating Plug &Play, etc.)When connecting or removing the HDMI 1.3 cable, please make sure to search devicesagain or turn your TV off and on again.Check if the Anynet+ Function of Anynet+ device is set on.●●●●●●●●●●I want to start Anynet+. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+(hDMI-CEC) is set to On in the Anynet+ Setup menu.Press the TV button on the TV remote control to switch to TV. Then press the tOOLSbutton to show the Anynet+ menu and select a menu you want.●●I want to exit Anynet+. Select View tV in the Anynet+ menu.Press the SOURCE button on the TV remote control and select a device other thanAnynet+ devices.Press z and PRE-Ch to change the TV mode. (Note that the channel buttonoperates only when a tuner-embedded Anynet+ device is not connected.)●●●the message Connecting toAnynet+ device... appears on thescreen.You cannot use the remote control when you are configuring Anynet+ or switching to aview mode.Use the remote control when the Anynet+ setting or switching to view mode is complete.●●the Anynet+ device does notplay.You cannot use the play function when Plug & Play is in progress.●the connected device is notdisplayed.Check whether or not the device supports Anynet+ functions.Check whether or not the HDMI 1.3 cable is properly connected.Check whether Anynet+ (hDMI-CEC) is set to On in the Anynet+ setup menu.Search Anynet+ devices again.You can connect an Anynet+ device using the HDMI 1.3 cable only. Some Some HDMIcables may not support Anynet+ functions.If it is terminated by an abnormal situation such as disconnecting the HDMI cable orpower cord or a power failure, please repeat the device scan.●●●●●●the tV program cannot berecorded.Check whether the antenna jack on the recording device is properly connected.●¦NN¦View tVSelect Device Record Menu on Device Device Operation Receiver :Off Setup U Move E EnterR ReturntV Air |
Related manuals for Samsung 5 Series
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved