Samsung 5 Series Installation Manual

Also see for 5 Series: Quick setup guide Quick setup guide Quick setup guide Quick start guide User manual

20English¦ USB CloningThe USB Cloning function lets you download user configured settings (Picture, Sound, Input, Channel, Setup, and HospitalSetup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets youcreate a standard array of settings and distribute that standard array to all the TVs in your facility.y Cloning from TV to USB: Copies stored menu settings from a TV to a USB device.1. Insert a USB drive into the USB port on the rear of the TV.2. Enter the Hospital option menu by pressing these buttons in order. MUTE→ 1 → 1 → 9 → ENTER3. Press the ▲ or ▼ button to select Clone:TV to USB, and then press theENTER button.4. The message Clone: TV to USB is displayed. Press the ENTER button.5. The TV displays one of the following messages:▪ In Progress: Copying data to USB.▪ Completed: Copy operation was successful.▪ Failed: Copy operation was not successful.▪ No USB: USB is not connected.The clone folder will be labeled T-MST10PAUSCP.✎ The cloned values include the values on the Guest side menu(brightness, picture size, contrast, etc.) and the Hospital side menu.Clone TV to USBClone USB to TVSetting Auto Initialize OFFCloning from USB to TV: Copies menu settings in a USB device to a TV.✎ Shortcut: Turn the TV off, insert the USB device, turn the TV on, and then press the ENTER button for 5 seconds.To clone data to the TV using the Hospital menu, follow these steps:1. Turn the TV off.2. Insert the USB drive into the USB port on the rear of the TV.3. Turn the TV on.4. Enter the Interactive menu by pressing these buttons in order. MUTE → 1→ 1 → 9 → ENTER5. Press the ▲ or ▼ button to select “Clone USB to TV”, and then press theENTER button.6. The message Clone: USB to TV is displayed. Press the ENTER button.7. The TV displays one of the following messages:Clone TV to USBClone USB to TVSetting Auto Initialize OFF▪ In Progress: Copying data to TV.▪ Completed: Copy operation was successful.▪ Failed: Copy operation was not successful.▪ No USB: USB is not connected▪ No File: There is no file to copy on the USB device. If you get a No File message, check the folder on your USBdevice. The folder name should be T-MST10PAUSCP.✎ If you insert the USB device when the TV is on, a pop-up window may appear. If this occurs, press Exit, and thencontinue.✎ Tables that list lthe settings that are cloned in the Interactive and Standalone Hospital Menus begin on the nextpage.Pre-condition for cloning (check point)– Cloning should be done between same model (same version).– Before cloning, all displays should be updated at the latest version (same version).