Qlogic 5800V Series User Manual

Also see for SANbox 5800V Series: Specifications User guide Installation guide Interface guide User guide

Contents

Qlogic 5800V Series User Manual Manual pdf 60 page image

2–Managing FabricsTransparent Router2-14 59266-01 BFigure 2-5. Add TR Mapping Dialog BoxMapping a New Inter-Fabric ZoneTo map a new inter-fabric zone:1. On the faceplate display on the Fabric menu, click TR Mapping Manager.2. On the TR Mapping Manager dialog box (Figure 2-4), click Add, or on theEdit menu, click Add.3. On the Add TR Mapping dialog box (Figure 2-5), select a local device fromthe 1 Select a Local Device column.4. Select a remote device option from the 2 Select a Remote Device column.5. Select a TR port option from the 3 Select a TR Port column.NOTE:The local fabric port to be used in the inter-fabric zone must be configuredas a TR_Port before the devices are mapped. See “Port Types” onpage 6-14 for information on changing port types.