1–Using Enterprise Fabric SuiteInstalling Enterprise Fabric Suite1-2 59266-01 BInstalling Enterprise Fabric SuiteYou can install Enterprise Fabric Suite on a Windows, Linux, Solaris, or Mac OS Xworkstation using the Enterprise Fabric Suite Installation CD-ROM.To install the Enterprise Fabric Suite application, do the following:For a Windows platform:1. Close all programs currently running, and insert the Enterprise Fabric SuiteInstallation Disk into the management workstation CD-ROM drive.2. In the upper left corner of the product introduction screen, clickManagement Software.3. Locate your platform in the table and click Install.If the product introduction screen does not open in step 2, open the CD-ROM withWindows Explorer and run the installation program with the following path:data\files\Management_Software\Windows\Windows_8.00.xx.xx.exeFor a Linux platform:Open the CD-ROM and run the installation program with the following path:data/files/Management_Software/Linux/Linux_8.00.xx.xx.binIf there is no CD-ROM icon, do the following:1. Open an xterm or other terminal window.2. Mount the CD-ROM. From a shell prompt, enter the following:mount /mnt/cdrom3. Change directory to the location of the install program:cd /mnt/cdrom/data/files/Management_Software/Linux4. Execute the install program and follow the installation instructions.Linux_8.00.xx.xx.binNOTE:A CD-ROM containing a free 30-day trial version of the Enterprise FabricSuite application is included with all QLogic 5000 Series switches. Duringinstallation you will be prompted to enter the serial number and license keyprovided to activate the 30-day trial version. Contact your switch distributoror authorized reseller to purchase Enterprise Fabric Suite.
