142ADJUSTMENTS[8] To return the convergence and white balance adjustment data to that at shipment:1) Set the adjustment mode.2) Press the 7 key.Select [7. MEMORY READ/COPY].3) Select the number from the SUB MENU.1 key : The convergence and deflection adjustment data will return to that at shipment.2 key : The white balance adjustment data will return to that at shipment.[9] To copy the convergence adjustment data between memories:1) Set the adjustment mode.2) Press the 7 key.Select [7. MEMORY READ/COPY].3) Press the 4 key of the SUB MENU.Select [4. CONV. MEMORY COPY].4) Select the copy pattern (keys 1 to 6).5) If the copy pattern number is correct, press the 0 key within 5 seconds. (If not, the copy pattern willbe displayed again.)If the copy pattern number is wrong, press the MAIN MENU key and repeat from step 2 again.[10] Resetting the setting1) Set the adjustment mode.2) Press the 7 key.Select [7. MEMORY READ/COPY].3) Press the 3 key of the SUB MENU.As a result, the following settings will be set.• MULTI (Peripheral light amount correction)=ON • Baud rate=4800 bps • COLOR MODE=1• TV SYSTEM=AUTO • VIDEO MUTE=OFF • COMBINATION=OFF• Convergence memoryNTSC input (VIDEO, Y/C, RGB)=MEMO-1PAL input (VIDEO, Y/C, RGB)=MEMO-2The adjustments using the above settings can be performed very easily.Example : When the baud rate of each MPJ is set to 2400 bps as they are not same.1 Press the ADJ IN key. (To set the adjustment mode).2 Press the 7 key (To select [7. MEMORY READ/COPY].)3 Press the 3 key (As the SUB MENU is selected, 4800 bps will be selected automatically.)• To set the baud rate to 4800 bps, proceed onto step 7.4 Press the 6 key. (Returns to the main menu).5 Press the 2 key (Select [2. OPERATION MODE]).6 Press the 7 key (As the baud rate changes cyclically, 2400 bps is selected.)7 Press the ADJ OUT key to select a baud rate.The adjustment is completed.
