Pioneer Elite PRO-1120HD Operating Instructions Manual

Also see for Elite PRO-1120HD: Correction Operating Instructions Operating instructions

Contents

10 Adjustments and Settings40EnYou can also use the menu to change the options.1 Press HOME MENU.2 Select “Picture”. ( / then ENTER)3 Select “AV Selection”. ( / then ENTER)4 Select the desired option. ( / then ENTER)AV SelectionSTANDARDDYNAMICMOVIEGAMEUSERFor AV sourceItem DescriptionSTANDARD For a highly defined image in a normallybright roomDYNAMIC For a very sharp image with the maximumcontrastThis mode does not allow manual imagequality adjustment.MOVIE For a movieGAME Lowers image brightness for easier viewing.USER Allows the user to customize settings asdesired. You can set the mode for each inputsource.For PC sourceItem DescriptionSTANDARD For a highly defined image in a normally(factory default) bright roomUSER Allows the user to customize settings asdesired. You can set the mode for each inputsource.5 Press HOME MENU to exit the menu.Sleep TimerWhen the selected time elapses, the Sleep Timer automaticallyplaces the system into the standby mode.Press SLEEP to select the desired time.• The timer starts counting.• Each time you press SLEEP, the selection is switched asbelow:(cancel)30 60 90120Off (minutes)• The factory default is “Off”.• To cancel the Sleep Timer, select “Off” by pressing SLEEP.• Five minutes before the selected time elapses, the remaining timeappears every minute.You can also use the menu to set the Sleep Timer.1 Press HOME MENU.2 Select “Sleep Timer”. ( / then ENTER)3 Select the desired time. ( / then ENTER)4 Press HOME MENU to exit the menu.AV SelectionSelect from the five viewing options, depending on the currentenvironment (e.g., room brightness), the type of the current TVprogram, or the type of images input from external equipment.1 Press AV SELECTION.• The current AV Selection mode appears.2 Press AV SELECTION again before the displayed modedisappears.• For AV source, the mode is switched in the order;STANDARD, DYNAMIC, MOVIE, GAME, then USER.• For PC source, the mode is switched betweenSTANDARD and USER.