Pioneer Elite PRO-1120HD Operating Instructions Manual

Also see for Elite PRO-1120HD: Correction Operating Instructions Operating instructions

Contents

07Basic OperationsEnglish25EnPlasma Display(right view)Channel bannerDTV 2 • 1002.102 AXXXXXXXXXX12:30pm — 2:00pm12:33pmCHANNEL +/–Watching TV channelsUnless you set up TV channels that you can watch under thecurrent conditions, you cannot tune in those channels. For theprocedure, see “Setting up TV channels” on page 31.• When watching a digital TV program, you may see emergency alertmessages scrolling at the top of the screen. Those messages arebroadcasted by TV stations as necessary when in emergencysituations.Selecting the antennaAfter confirming that the Mode switch on the remote controlunit has been set to “TV”, press ANT on the remote control unitto select antenna A or B.• Make this selection depending on the connections to theantenna input terminals on the Media Receiver (page 21).Changing channelsTo increase the channel number, press CH + on the remotecontrol unit. To decrease the channel number, press CH –.• CHANNEL +/– on the Plasma Display operates the same asCH +/– on the remote control unit.• Press CH RETURN to switch the currently tuned channel tothe previously tuned channel.Press CH RETURN again to restore the currently tunedchannel.Using 0 – 9 and • (dot) on the remote control unitSelect channels directly by pressing buttons 0 to 9. To selectsubchannels, also use the • (dot) button.EXAMPLE• To select channel 5 (1-digit channel), press 5.• To select channel 25 (2-digit channel), press 2 then 5.• To select channel 125 (3-digit channel), press 1, 2, then 5.• To select subchannel 10.01, press 1, 0, • (dot), 0, then 1.• To select subchannel 10.001 (for the cable TV), press 1, 0,• (dot), 0, 0, then 1.• After entering a channel or subchannel number, you may pressCH ENTER to tune in the channel more quickly.• Each time you change a channel, such a channel banner appearsthat shows information about the currently selected channel. To clearthe channel banner, press DTV INFO. For more information aboutthe channel banner, see “Viewing a channel banner” on page 26.