Panasonic th-49lf8w Operating Instructions Manual

Contents

Panasonic th-49lf8w Operating Instructions Manual Manual pdf 51 page image

51EnglishDate and timeSet date and time. ([- -] shows no programme is set.)[Date and time] - sub menu screenDate and timeSetTHURSDAY 10:002015/01/01Year 2015MonthDayHourMinute11100■ Set date and timeSelect [Year / Month / Day / Hour / Minute].Set the selected item.Date and timeSetTHURSDAY 10:002015/01/01Year 2016MonthDayHourMinute11100Select [Set] and press .Date and timeSetFRIDAY 18:002016/02/05Year 2016MonthDayHourMinute25180Note● If the present date and time are not set, the timesettings for [Set up timer], [Screensaver], etc. cannotbe made.● The present date and ime setting is reset in thefollowing case.When the main unit is left unattended for 7 days orlonger after the

isturned OFF, the power plug is removed, or powerfailure has occurred, etc.● Date and time cannot be set when [Year / Month /Day / Hour / Minute] are set to [- -].Network settingsSet when networking with a computer.[Network settings] submenu will be displayed.LF8Network settingsNetwork controlLF8-00OffOffOffDisplay nameNetwork statusLAN setupAMX D D.Crestron Connected™ResetLF80Network settingsSerial controlLF80-00AutoOffSERIAL INOffOffDisplay nameDIGITAL LINK modeDIGITAL LINK statusDIGITAL LINK menuNetwork statusLAN setupAMX D.D.Extron XTPCrestron Connected™ResetOffNetwork control■ [Serial control] (LF80 series only)Selects the RS232-C control terminal.[SERIAL IN]:Controls using the SERIAL IN terminal of thedisplay.[DIGITAL LINK]:Controls via the optional device that supportsDIGITAL LINK output (ET-YFB100G, ET-YFB200G) and the DIGITAL LINK / LAN terminal.