Panasonic th-49lf8w Operating Instructions Manual

Contents

Panasonic th-49lf8w Operating Instructions Manual Manual pdf 19 page image

19EnglishCOMPONENT/RGB IN terminalconnectionNote● Additional video equipment, cables and conversionadapter shown are not supplied with this set.G/Y/VIDEOB/PB/CBR/PR /CRAUDIO2 INCOMPONENT/RGB/VIDEO INR LP RPBYStereo miniplug (M3)Shared with VIDEO IN.Video pin cable (commercially available)Pin-BNC conversion plug (commercially available)Stereo audio cable (commercially available)DVD PlayerRGB cameraNote● In accordance wi h the input signal connected toCOMPONENT/RGB IN terminal, select he input[Component] or [RGB] in [Signal] - [Component/RGB-in select]. (See page 44)● The RGB signal input to COMPONENT/RGB INterminal corresponds to “SYNC ON G” only.● For audio, it is also possible to use AUDIO1 INterminal input. (For [Audio input select] function, seepage 63.)SERIAL terminal connectionThe SERIAL terminal conforms to the RS-232C interfacespecification, so that the Display can be controlled by acomputer which is connected to this terminal.SERIAL OUT SERIAL IND-sub 9p(Female)(Male)RS-232C Straight cable (commercially available)PCNote● Use the RS-232C straight cable to connect thecomputer to the Display.● The computer shown is for example purposes only.● Additional computer and cables shown are notsupplied with this set.● LF80 series onlyFor serial control, make sure to set [Network settings]- [Serial control] to [SERIAL IN]. (see page 51)