Panasonic th-49lf8w Operating Instructions Manual

Contents

Panasonic th-49lf8w Operating Instructions Manual Manual pdf 48 page image

English48[DIGITAL LINK power management] (LF80 series)When this function is set to [On], it operates underhe following conditions to turn the power on or offautomatically.When no pictures (sync signal) are detected for60 or so seconds at DIGITAL LINK input:Power is turned off (standby); the power indicatorlights up orange.When pictures (sync signal) are subsequentlydetected:Power is turned on; the power indicator lights upgreen.[DVI-D power management]When this function is set to [On], it operates underhe following conditions to turn the power on or offautomatically.When no pictures (sync signal) are detected for60 or so seconds at DVI-D input:Power is turned off (standby); the power indicatorlights up orange.When pictures (sync signal) are subsequentlydetected:Power is turned on; the power indicator lights upgreen.[PC power management] (DPMS function)When this function is set to [On], it operates underhe following conditions to turn the power on or offautomatically.When no pictures (HD/VD sync signals) aredetected for 60 or so seconds at PC input:Power is turned off (standby); the power indicatorlights up orange.When pictures (HD/VD sync signals) aresubsequently detected:Power is turned on; the power indicator lights upgreen.Note● This function is effective when [Sync] in [Signal]is set to [Auto] or [HV sync] and during normalviewing and [Component/RGB-in select] is set to[RGB]. (see page 44)[Power save]This function adjusts the brightness of the backlight toreduce power consumption.[Off]:This function does not operate.[On]:Backlight brightness is reduced.Note● If [Input search] is set to items other than [Off], the[Input search] function is prioritised. (The “Powermanagement” function does not operate for eachterminal.) (For details of [Input search] function,see page 59.)● If [Failover/Failback] is set to items other than [Off],the [Failover/Failback] function is prioritised. (The“Power management” function does not operate foreach terminal.) (For details of [Failover/Failback]function, see page 60.)