Panasonic WV-SW395 Installation Manual

Also see for WV-SW395: Integration note Product catalog Comparison chart Operating instructions Operating instructions

Contents

Panasonic WV-SW395 Installation Manual Manual pdf 28 page image

Configure the network settingsInstall the softwareBefore installing the software, refer to the readme file on the provided CD-ROM first.Software included on the provided CD-ROM• Panasonic IP setting softwareConfigure the network settings of the camera. Refer to the following for further information.• Viewer Software "Network Camera View 4S"It is necessary to install the viewer software "Network Camera View 4S" to display images on a PC. Install the viewersoftware by double-clicking the "nwcv4Ssetup.exe" icon on the provided CD-ROM.Configure the network settings of the camera using the Panasonic IP setting softwareIt is possible to perform the network settings of the camera using the IP setup software on the provided CD-ROM.When using multiple cameras, it is necessary to configure the network settings of each camera independently.If the Panasonic IP setting software does not work, configure the network settings of the camera and the PC individually onthe "Network" page of the setup menu. Refer to the Operating Instructions (PDF) for further information.Important:• When using Microsoft Windows Vista, the "Windows Security Alert" window may be displayed when starting the IPsetup software. In this case, disable "User Account Control" from the control panel.• For the security enhancement, the MAC address/IP address of the camera to be configured will not be displayed whenaround 20 minutes have passed after turning on the power of the camera. (When the effective period is set to "20min"in the IP setup)• Panasonic IP setting software is inoperable in other subnets via the same router.• This camera cannot be displayed or set with an older version of the IP setup software (version 2.xx).28