Panasonic WV-NW960 Installation Manual

Also see for WVNW964 - NETWORK CAMERA: Integration note Brochure Reference Product catalog Reference

Panasonic WV-NW960 Installation Manual Manual pdf 25 page image

25Configure the network settingsInstall the softwareBefore installing the software, read the readme file on the provided CD-ROM first.Software included on the provided CD-ROM• Panasonic IP Setup SoftwareConfigure the network settings of the camera. Refer to the following for further information.• Viewer Software "Network Camera View3"It is necessary to install the viewer software "Network Camera Viewer3" to display images on a PC. Install theviewer software by following the displayed instructions after double-clicking the "nwcv3setup.exe" icon on theprovided CD-ROM or install from the camera directly ( Setup instructions (PDF)).Configure the network settings of the camera using the Panasonic IP settingsoftwareIt is possible to perform the network settings of the camera using the IP setup software on the provided CD-ROM.When using multiple cameras, it is necessary to configure the network settings of each camera independently.If the Panasonic IP setting software does not work, perform the network settings of the camera and the PC individuallyon the "Network setup" page of the setup menu. Refer to the setup instructions (PDF) for further information.Important:• The "Windows Security Alert" window may be displayed when starting the IP setup software.In this case, click the "Unblock" button on the displayed "Windows Security Alert" window.• For the security enhancement, the MAC address/IP address of the camera to be configured will not be displayedwhen around 20 minutes have passed after turning on the power of the camera. However, the MAC address/IPaddress of the camera will be displayed even after around 20 minutes have passed when the values of all the fol-lowing setup items are still the default values; "IP address", "Default gateway", "Net mask", "HTTP port", "DHCP","User name", "Password".• The Panasonic IP setting software is inoperable in other subnets via the same router.