21Connection exampleWhen connecting with a PC directlyEthernet cable (category 5, cross)When connecting to a network (hub)Ethernet cable (category 5, straight)Important:• The monitor out connector is provided only for checking the adjustment of the angular field of view on the videomonitor when installing the camera or when servicing. It is not provided for recording/ monitoring use.• Depending on the monitor, some characters (camera title, preset ID, etc.) may not be displayed on the screen.• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.• Power supply is required for each network camera.To an outlet(24 V AC) for WV-NW964Ethernet cable (category 5, cross)PCAmplifier built-in speaker(procure locally)Plug-in power type microphone(procure locally)RJ45 conversion connector (provided)Recommended total extended cable length: 1 mTo an outlet(220 V to 240 V AC) for WV-NW960HubPCEthernet cable(category 5, straight)Ethernet cable(category 5, straight)Ethernet cable(category 5, straight)RJ45 conversion connector (provided)RJ45 conversion connector (provided)Monitor (only foradjustment)Monitor (only foradjustment)RJ45 conversion connector (provided)Amplifier built-in speaker(procure locally)Plug-in power type microphone(procure locally)Amplifier built-in speaker(procure locally)Plug-in power type microphone(procure locally)Recommended total extended cable length: 1 mTo an outlet(24 V AC)for WV-NW964To an outlet(220 V to 240 V AC)for WV-NW960To an outlet(24 V AC) for WV-NW964To an outlet(220 V to 240 V AC)for WV-NW960
