Panasonic WV-NW502SE Installation Manual

Also see for WV-NW502SE: Operating instructions

Panasonic WV-NW502SE Installation Manual Manual pdf 6 page image

6PrefacePanasonic WV-NW502SE is designed to operate using a PC on a network (10BASE-T/100BASE-TX), and can be installed under eaves (sheltered outdoor).By connecting to a network (LAN) or the Internet, images and audio from the camera can bemonitored on a PC via a network.Note:• It is necessary to configure the network settings of the PC and its network environment tomonitor images from the camera on the PC. It is also necessary to install a web browser onthe PC.Main functionsHigh resolution (2 048 x 1 536) imageImages with high resolution up to 2 048 x 1 536 (3 megapixel) can be transmitted.MEGA Super DynamicSuper-Dynamic compensates brightness on a pixel-to-pixel basis resulting in production of nat-ural images even if a subject has various illumination intensities.H.264/MPEG-4 and JPEG triple encodingH.264/MPEG-4 dual stream output and JPEG output can be simultaneously provided.* Either H.264 or MPEG-4 is selectable.Auto back focus (ABF) functionABF (Auto Back Focus) ensures easy installation and stable focus in both color and B/Wmodes.Black & white functionImages will be displayed clear even at night since the camera will be automatically switchedfrom the color mode to the black and white mode under low illumination condition.* The operating sound might be heard during the mode change, however it does not indicateany malfunction.Power over Ethernet functionWhen connecting with a PoE (Power over Ethernet) device, power will be supplied by simplyconnecting a LAN cable. (IEEE802.3af compliant)Interactive communication with audioBy using the audio output connector and the microphone in connector, receiving audio fromthe camera on a PC and transmitting audio from the PC to the camera is available.