Panasonic WV-NW502SE Installation Manual

Also see for WV-NW502SE: Operating instructions

Panasonic WV-NW502SE Installation Manual Manual pdf 11 page image

11Turn the power off when cleaning of thisproduct.Failure to observe this may cause injury.[Precautions for use]This product has no power switch.When turning off the power, turn off a circuitbreaker.To keep on using with stable performanceDo not use this product in hot and humidconditions for a long time. Failure to observethis causes component degradation resultingin life shortening of this product.(Recommended operating temperature:+35 °C or lower)Do not expose this camera to direct heatsources such as a heater.Do not touch the dome cover with yourbare hands.A dirty dome cover causes deterioration ofpicture quality.Handle this product with care.Do not abuse this product. Avoid striking,shaking, etc. Failure to observe this maycause trouble. If a strong shock or vibrationis applied to the enclosure, it may causedamage or allow water to enter this product.About the PC monitorDisplaying the same image on a CRT typemonitor for a long time may damage themonitor. It is recommended to use a screen-saver.When an error is detected, this productwill restart automatically.When an error is detected, this product willrestart automatically. This product will beinoperable for around 2 minutes after therestart just as when the power is turned on.Product disposal/transferData saved on the media used with this prod-uct may be categorized as "PersonalInformation".Therefore, if this product is handled by thethird party because of disposal, transfer orrepair, extreme care should be required fordata handling.Cleaning this product bodyBe sure to turn off the power before cleaning.Failure to observe this may cause injury. Donot use strong abrasive detergent whencleaning this product. Otherwise, it maycause discoloration.When using a chemical cloth for cleaning,read the caution provided with the chemicalcloth product.When the dirt is hard to remove, use amild detergent and wipe gently.When the dirt is hard to remove, use a milddetergent and wipe gently. Then, wipe off theremaining detergent with a dry cloth.Cleaning the lensUse a lens cleaning paper (used to cleancamera lenses or lenses of spectacles).When using solvent, use an alcohols solventand do not use a thinner or a glass cleaner.Transmission intervalImage transmission interval may becomeslow depending on the network environment,PC performance, shooting subject, accessnumber, etc.About SDHC/SD memory card• Before inserting the SDHC/SD memorycard, turn off the power of this productfirst. Otherwise, it may cause malfunctionor damage data recorded on theSDHC/SD memory card. Refer to page24 for descriptions of how to insert/remove an SDHC/SD memory card.• When using an unformatted SDHC/SDmemory card, format it using this prod-uct. Recorded data on the SDHC/SDmemory card will be deleted when for-matted. If an unformatted SDHC/SDmemory card or an SDHC/SD memorycard formatted with other devices isused, the camera may not work properlyor performance deterioration may becaused. Refer to the OperatingInstructions (PDF) for how to format anSDHC/SD memory card.