Panasonic WV-NW502S Operating Instructions Manual

Also see for WV-NP502: Product catalog Integration note Product catalog Comparison chart Operating instructions

Contents

Panasonic WV-NW502S Operating Instructions Manual Manual pdf 71 page image

71[Time adjustment]Select the time adjustment method from the following.Time adjusted by the selected method will be used asthe standard time of the camera.Manual: Time set on the [Basic] tab on the "Basic" pagewill be used as the standard time of the camera.Synchronization with NTP server: Time automaticallyadjusted by synchronizing with the NTP server willbe used as the standard time of the camera.Default: Manual[NTP server address]Enter the IP address or the host name of the NTP serv-er.Available number of characters: 1 - 128 charactersDefault: None (blank)Important:• When entering the host name for "NTP serveraddress", it is necessary to configure the DNS set-tings on the [Network] tab of the "Network" page.( page 73)[NTP port]Enter a port number of the NTP server.Available port number: 1 - 65 535Default: 123[Time adjustment interval]Select an interval (1 - 24 hours: in 1 hour intervals) ofsynchronization with the NTP server.Default: 1h[Time zone]Select a time zone corresponding to the location wherethe camera is in use.Default: (GMT) Greenwich Mean Time: Dublin,Edinburgh, Lisbon, LondonConfigure the settings relating to the NTP server [NTP]Click the [NTP] tab on the "Server" page. ( pages 20 and 21: How to display/operate the setup menu)The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured on thispage.