27TTINITIAL SETSD memory card slotTTINITIAL SETSD memory card slotInsert/remove an SD memory cardr Tighten the screw to close the SD memory card slot cover firmly.Recommended tightening torque: 0.19 N·m {2.0 kgf·cm}Important:• Before inserting the SD memory card, turn off the power of the camera first.How to insert an SD memory cardImportant:• Make sure that the SD memory card is inserted with the reverse side up.q Loosen the lock screw ofthe SD memory card slotcover.w Open the SD memorycard slot cover.e Insert the SD memorycard into the SD cardmemory slot.r Tighten the screw to close the SD memory card slot cover firmly.Recommended tightening torque: 0.19 N·m {2.0 kgf·cm}t Select "Use" for "SD memory card" on the [SD memory card] tab of "Basic setup" on thesetup menu.( Setup instructions (PDF))How to remove the SD memory cardImportant• Before removing the SD memory card, select "Not use" for "SD memory card" on the [SDmemory card] tab of "Basic" on the setup menu first. After configuring the setting above,turn off the power of the camera and then remove the SD memory card. ( Setup instruc-tions (PDF))q Loosen the lock screwof the SD memorycard slot cover.w Open the SD memorycard slot cover.e Release the locked SD memorycard by pushing the card andthen pull the SD memory cardfrom the slot.