Panasonic WV-NP304 Installation Manual

Also see for WV-NP304: Product catalog Integration note Brochure Reference Comparison chart

Panasonic WV-NP304 Installation Manual Manual pdf 21 page image

21Camera mountingMount the camera onto an optional camera mount bracket and attach the safety wire.Important:• Make sure that the installing place is strong enough to support the total weight of the cam-era and the camera mount bracket.• Installing the camera mount bracket on the foundation part of the building or equivalentstrong part.• Do not use wood screws to fix the camera mount bracket (option) since they are not strongenough to support the weight of the camera and the bracket.z Fix an optional camera mount bracket onto the desired place and mount the camera on it.Use appropriate screws for the ceiling/wall material to secure an optional camera mountbracket. Method of installation may be different depending on the material of the placewhere the camera mount bracket is to be installed.• When installing on steel: Fix with bolts and nuts (M6 or M8)• When installing on concrete: Fix with anchor bolts (M6 or M8)• The following are the requirements of the camera mount bracket installation:More than 270 cmFloorImportant:• When installing the camera mountbracket on wall, installation height of thecamera mount bracket shall be as indi-cated in the following illustrations.Installing placeOn ceilingOn wallAppropriate cam-era mount bracketWV-7010ARecommendedscrewM6 or M8Number ofscrew3 pcs.Pull-out capacityof a single screw196 N {20 kgf}WV-831 M8 4 pcs. 921 N {94 kgf}