Panasonic WV-NP244 Operating Instructions Manual

Also see for WVNP244 - COLOR CCTV CAMERA: Product catalog Integration note Brochure Reference Reference

Contents

Panasonic WV-NP244 Operating Instructions Manual Manual pdf 39 page image

39Configuring the network settings [Network setup]The network settings and the settings relating to DDNS (Dynamic DNS) and SNMP (Simple Network managementProtocol) can be configured on this page.The "Network setup" page has 3 tabs of the [Network] tab, the [DDNS] tab, the [SNMP] tab and the [FTP] tab.Configure the network settings [Network]Click the [Network] tab on the "Network setup" page. (☞ page 16)The following information is required to configure the network settings.Contact the network administrator or your Internet service provider.• IP address• Net mask• Default gateway (when using the gateway server/router)• HTTP port Number• Primary DNS, Secondary DNS (when using DNS)[DHCP]Select "ON" or "OFF" to determine whether or not to usethe DHCP function.Configure the DHCP server not to assign the same IPaddresses used for the other network cameras and PCswhose IP address is unique.Refer to the network administrator for the settings of theserver.Default: OFF[IP address]When not using the DHCP function, enter the IPaddress of the camera. Do not enter the IP addressalready in use (for the PCs and the other network cam-eras).Default: 192.168.0.100. *. *. **. *. *. 0255. *. *. **. *. *. 255127.0.0.1Class D address (224.0.0.0 - 239.255.255.255)Class E address (240.0.0.0 - 255.255.255.255)Note:These IP addresses are unavailable even whenusing the DHCP function. Refer to the networkadministrator for the settings of the DHCP server.[Net mask]When not using the DHCP function, enter the net maskof the camera.Default: 255.255.255.0