Panasonic WV-NP244 Operating Instructions Manual

Also see for WVNP244 - COLOR CCTV CAMERA: Product catalog Integration note Brochure Reference Reference

Contents

Panasonic WV-NP244 Operating Instructions Manual Manual pdf 19 page image

19Configure the basic settings of the camera [Basic setup]The basic settings such as time and date and camera name, and the settings relating to the NTP server and the SDmemory card can be configured on the "Basic setup" page.The "Basic setup" page has 3 tabs of the [Basic] tab, the [NTP] tab and the [SD memory card] tab.Configure the basic settings [Basic]Click the [Basic] tab on the "Basic setup" page. (☞ page 16)The settings such as the camera name, time and date, etc. can be configured on this page.[Camera title]Enter the title of the camera. Click the [SET] button afterentering the title of the camera. The entered title will bedisplayed in the status display area.Number of characters for the camera title: 0 - 20charactersDefault: WV-NP244[Time and date setup]Enter the current time and date. When "12-hours" isselected for "Time display", "AM" or "PM" can be select-ed.Available range: 01/01/2005 0:00:00 – 12/31/203523:59:59:59[Time display]Select "12-hours" or "24-hours". Enter the current hourreflecting this setting when entering the current time anddate for "Time and date setup".Default: 24-hours[Date/time display format]Select a date/time display format.When "04/01/2005 13:10:00" is set for "Time and datesetup" after selecting "24-hours" for "Time display", timeand date will be displayed as follows respectively.DD/MM/YYYY01/04/2005 13:10MM/DD/YYYY04/01/2005 13:10DD/Mmm/YYYY01/Apr/2005 13:10YYYY/MM/DD2005/04/01 13:10Mmm/DD/YYYYApr/01/2005 13:10Default: MM/DD/YYYY[Daylight saving (Summertime)]Select "ON" or "OFF" to determine whether or not toapply daylight saving time.ON: Applies summer time. An asterisk (*) will be dis-played on the left side of the displayed time anddate.OFF: Does not apply summer time.Default: OFF[Link/Access LED]Select "ON" or "OFF" to determine whether or not tolight the link LED, the access LED of the network con-nector, and the SD memory card error LED.Select "ON" to check the network status by lighting theLEDs. Select "OFF" to turn off the LEDs at all times.However, the power indicator will light even when "OFF"is selected.Default: ON