11Transmit Images onto an FTP ServerImages can be transmitted to an FTP server. By configuring the following settings, transmission of images capturedat an alarm occurrence or captured at a designated interval to an FTP server will become available.Important:When using this function, set the user name and password to restrict users who can log into the FTP server.Transmit an alarm image at an alarm occurrence (Alarm imageFTP transmission)An alarm image can be transmitted at an alarm occurrence to the FTP server. To transmit alarm images to an FTPserver, it is necessary to configure the settings in advance.The settings for the FTP server can be configured on the [FTP] tab of the "Server setup" page. (☞ page 38)The alarm image FTP transmission function can be turned on/off on the [Alarm] tab of the "Alarm setup" page.(☞ page 28)Note:Depending on the network traffic, number of the transmitted images may not reach the set number of images tobe transmitted.Transmit images at a designated interval or period (FTP periodictransmission)Images can be transmitted at a designated interval or period. To transmit images at a designate interval or period, itis necessary to configure the settings in advance.The settings for the FTP server can be configured on the [FTP] tab of the "Server setup" page. (☞ page 38)On the [FTP] tab of the "Network setup" page, the FTP periodic transmission function can be turned on/off, and thesettings relating to schedules (periods) can be configured. (☞ page 43)Notes:• Depending on the network line speed or the network traffic, images may not be transmitted at the exact designat-ed interval or period.• When "ON" is selected for both of the alarm image FTP transmission function and the FTP periodic transmissionfunction, the alarm image FTP transmission function will be given priority over the FTP periodic transmissionfunction. For this reason, images may not be transmitted at the exact designated interval or period if alarmsoccur frequently.