Panasonic WV-NF302 Setup Instructions

Also see for WVNF302 - NETWORK CAMERA: Product catalog Integration note Brochure Reference Comparison chart

Panasonic WV-NF302 Setup Instructions Manual pdf 51 page image

How to configure the schedule settingsStep 1Check the check box of the desired day of the week of"FTP image transmission schedule".→ The selected day of the week will be validated for theschedule.Step 2To designate time, click [C] and select the desired"hour" and "minute".When not designating time, check the checkbox of"24h".Step 3Click the [Set] button after completing the settings.→ The result will be displayed at the bottom of the win-dow.How to delete the set scheduleStep 1Uncheck the check box of the set day of the week.Step 2Click the [Set] button after completing the settings.→ The result will be displayed at the bottom of the win-dow.51Configure the schedule settings of the FTP periodic image transmissionClick the [FTP img. trans.] tab on the "Network" page. ( pages 4 and 5: How to display/operate the setup menu)The settings of schedules to transmit the alarm images to the FTP server can be configured on this page.Refer to page 50 for how to configure the settings for the FTP periodic image transmission function.[Transmission interval]Select the interval for the FTP periodic image transmis-sion from the following.1 sec/2 sec/3 sec/4 sec/5 sec/6 sec/10 sec/15 sec/20 sec/30 sec/1 min/2 min/3 min/4 min/5 min/6 min/10 min/15 min/20 min/30 min/1 hour/1.5 hours/2 hours/3 hours/4 hours/6 hours/12 hours/24 hoursDefault: 1 sec[Image capture size]Select "QVGA", "VGA" or "1 280 x 960" for the imagecapture size of the images to be transmitted using theFTP periodic image transmission.Default: VGA