Panasonic WV-NF302 Setup Instructions

Also see for WVNF302 - NETWORK CAMERA: Product catalog Integration note Brochure Reference Comparison chart

Panasonic WV-NF302 Setup Instructions Manual pdf 43 page image

43Configure the settings relating to the FTP server [FTP]Click the [FTP] tab on the "Server" page. ( pages 4 and 5: How to display/operate the setup menu)The settings relating to the FTP server used to transmit the alarm images can be configured on this page.[FTP server address]Enter the IP address or the host name of the FTP serv-er.Number of characters for the FTP server address:1 - 128 charactersImportant:When entering the host name for "FTP serveraddress", it is necessary to configure the DNS set-tings on the [Network] tab of the "Network" page.( page 46)[User name]Enter the user name (login name) to access the FTPserver.Number of characters for the user name: 1 - 32 char-acters[Password]Enter the password to access the FTP server.Number of characters for the password: 0 - 32 char-acters[Control port]Enter a control port number to be used for the FTP serv-er.Available port number: 1 - 65535Default: 21[FTP mode]Select "Passive" or "Active" for the FTP mode.Normally, select "Passive". When failure to establish theconnection occurs, select "Active".Default: Passive