14 Inside the dome coverq Monitor out connector (for adjustment)(RCA jack) [MONITOR]This connector is provided only forchecking the adjustment the angular fieldof view or the focus on the video monitorwhen installing the camera or when serv-icing. ( page 22)w Indicators ON/OFF switch [LED]Select "ON" or "OFF" to determinewhether or not to activate the link indica-tor and the access indicator.Important:Select "ON" (default) for normal use.When "ON" is selected, it is possible toturn on/off this switch using a PC via anetwork.When it is necessary to turn off the indi-cators, turn off the indicators using a PCvia a network (by selecting "OFF" for"Link/Access LED" of "Basic Setup" onthe setup menu).(Refer to the setup instructions (PDF) forfurther information.)e LEDs (Indicators)The LEDs will light/blink according to thestatus of the camera as follows.Access indicator (green):Blinks when the camera is accessed.Link indicator (orange):Lights when the communication witha network is established.SD memory card error indicator/Focusassist indicator (red):Lights in the following cases.When images cannot be stored onthe SD memory card,When the focus assist function isstarted,When BEST FOCUS is displayed.r SD memory card slot [SD]Insert an SD memory card. ( page 29)t Focus assist (F.A.) buttonActivates the focus assist function.( page 27)y Focus ringUse this ring to adjust the focus.( page 27)u Zoom ringUse this ring to adjust the angular field ofview. ( page 27)i Tilting tableRotate this table to adjust the tilting angleof the camera. ( page 26)o Image tilt adjustment ringUse this ring to correct image tilt.( page 26)!0 Panning table fixing screw [LOCK]Fix the panning table with this screw afteradjusting the panning angle of the cam-era. ( page 26)!1 Panning tableRotate this table to adjust the panningangle of the camera. ( page 26) Dome coverProtect the camera head with this domecover.!2 Upper cover( pages 20 - 21)!3 Smoke domeRemove the cover film from the domecover after the installation is complete.Do not touch the dome cover by handdirectly after removing the cover film.

network camera

Important Safety Instructions

Limitation of Liability

Preface

About These Operating Instructions

Trademarks and Registered Trademarks

Precautions

Major Operating Controls and Their Functions

dome cover

Precautions for Installation

Installations/Connections

connection example

Adjustment of Shooting Direction

Adjustment of Angular Field of View and Focus

Insert/Remove an SD Memory Card

Configure the Network Settings

Troubleshooting

Specifications

Standard Accessories

Panasonic WV-NF302 Installation Manual

Fixed Dome

Vandal-Resistant

Super Dynamic Technology Comparison Chart

i-Pro Network Camera Lineup Chart

Cameras

Recording Software

Network Camera Lineup Charts

Network Video Recorders

Encoders

Decoder

Management Server

Fixed Color

Digital Video Recorders

Accessories

network video recorders

Management Software Comparison Chart

Matrix Switcher

Management Software

Multiplexer/Quad

system controller

Color Monitors

WVNF302 - NETWORK CAMERA

Monitor images on a PC

Monitor images from multiple cameras

Record images on the SD memory card manually

Action at an alarm occurrence

Transmit images onto an FTP server

Save images on the SD memory card when images fail to transmit using the FTP periodic transmission function

Panasonic WV-NF302 Installation Manual

Product

Learn More

Legal