Panasonic WV-NF302 Installation Manual

Also see for WVNF302 - NETWORK CAMERA: Product catalog Integration note Brochure Reference Comparison chart

Panasonic WV-NF302 Installation Manual Manual pdf 30 page image

30Configure the Network SettingsInstall the softwareBefore installing the software, read the readme file on the provided CD-ROM first.Software included on the provided CD-ROM• Panasonic IP Setting SoftwareConfigure the network settings of the camera. Refer to the following for further information.• Viewer Software "Network Camera View3"It is necessary to install the viewer software "Network Camera Viewer3" to display imageson a PC. Double-click the "nwcv3setup.exe" icon on the provided CD-ROM and follow theinstructions of the displayed install wizard to install the viewer software "Network CameraViewer3".Configure the network settings of the camera using thePanasonic IP setting softwareIt is possible to configure the network settings of the camera using the IP setting software onthe provided CD-ROM.When using multiple cameras, it is necessary to configure the network settings of each cameraindependently.If the Panasonic IP setting software does not work, configure the network settings of the cameraand the PC individually on the "Network" page of the setup menu. Refer to the setup instructions(PDF) for further information.Important:• When using Windows® XP SP2, the "Windows Security Alert" window may be displayedwhen starting the IP setting software.In this case, click the "Unblock" button on the displayed "Windows Security Alert" window.• If Windows Vista® is used, the password of the administrator account may be required afterstartup of the Panasonic IP setting software. In such a case, disable “User AccountControl” from Control Panel.• For the security enhancement, the MAC address/IP address of the camera to be config-ured will not be displayed when around 20 minutes have passed after turning on the powerof the camera.• The Panasonic IP setting software is inoperable from other subnets via the same router.• It is impossible to display and configure this camera when using an old version (ver. 2.xx)of the Panasonic IP setting software.