15 Mounting side!4 External I/O terminalsConnect an external device to these ter-minals. ( page 23)!5 INITIAL SET buttonUse this button to reset the settings ofthe camera to the default settings.Turn off the power of the camera. Then,turn on the power of the camera whileholding down this button and wait around5 seconds without releasing this button.Wait around 30 seconds after releasingthe button. The camera will restart andthe settings including the network andthe date/time settings will be initialized.!6 12 V DC power terminalConnect the power cord from a 12 V DCpower supply. ( page 22)!7 Audio input/output terminalConnect the audio cable (accessory) tothis connector. ( page 23)!8 Network connector/Access LED, LinkLEDConnect a LAN cable (category 5 or bet-ter) to this connector. ( page 23)Access LED (LINK): This LED will lightwhen accessing a network. [Green]Link LED (ACT): This LED will light whencommunication with the connecteddevice is available. [Orange]These LEDs cannot be turned on/off bythe indicators ON/OFF switch w.To determine whether or not to light thelink LED and the access LED, configurethe setting using a web browser.!9 Safety wire holderAttach the safety wire fixed with the cam-era mount bracket to the holder. Makesure that the safety wire is securelyhooked on the safety wire holder whenadjusting or installing the camera.( page 20) Camera mount bracket@0 Safety wireAttach this wire to the safety wire holderof the camera. Make sure that the safetywire is securely hooked on the safetywire holder when adjusting or installingthe camera. ( page 20)

network camera

Important Safety Instructions

Limitation of Liability

Preface

About These Operating Instructions

Trademarks and Registered Trademarks

Precautions

Major Operating Controls and Their Functions

dome cover

Precautions for Installation

Installations/Connections

connection example

Adjustment of Shooting Direction

Adjustment of Angular Field of View and Focus

Insert/Remove an SD Memory Card

Configure the Network Settings

Troubleshooting

Specifications

Standard Accessories

Panasonic WV-NF302 Installation Manual

Fixed Dome

Vandal-Resistant

Super Dynamic Technology Comparison Chart

i-Pro Network Camera Lineup Chart

Cameras

Recording Software

Network Camera Lineup Charts

Network Video Recorders

Encoders

Decoder

Management Server

Fixed Color

Digital Video Recorders

Accessories

network video recorders

Management Software Comparison Chart

Matrix Switcher

Management Software

Multiplexer/Quad

system controller

Color Monitors

WVNF302 - NETWORK CAMERA

Monitor images on a PC

Monitor images from multiple cameras

Record images on the SD memory card manually

Action at an alarm occurrence

Transmit images onto an FTP server

Save images on the SD memory card when images fail to transmit using the FTP periodic transmission function

Panasonic WV-NF302 Installation Manual

Product

Learn More

Legal