Panasonic WJ-HD500A Operating Instructions Manual

Also see for WJHD500A - Digital Disk Recorder: Operating instructions Operating instructions

Contents

Panasonic WJ-HD500A Operating Instructions Manual Manual pdf 53 page image

557. Move the cursor to the DYNAMIC REC parameter bypressing the D or C button, then select the recordingpattern for post-recording by pressing the + or - but-ton.OFF: Records the images assigned to group inputs,including the one that has activated the alarm (thesame as pre-recording).ALM-ONLY: Records the particular image that has acti-vated the alarm.The factory default setting is OFF.8. Move the cursor to the AUTO COPY parameter bypressing the D or C button, then select alarm backupmode by pressing the + or - button.OFF: Disables alarm data backup.ON: Enables alarm data backup.The factory default setting is OFF.9. Press the SETUP/ESC button to return to the previousprogram number menu. One Shot Recording (Internal Timer)As described before, the One Shot Recording is an eventrecording function reacting to an alarm input.It records the number of particular images that have acti-vated the alarm.These items let you determine the recording parameters forOne Shot Recording assigned in the program numbermenu.(continued from Program Timer)1. Select the recording mode O/S in the program numbermenu by pressing the + or - button, then press theSET button.The selected One Shot Recording menu as shownbelow appears on the monitor screen.2. Move the cursor to the TRIGGER ACTION parameter inthe menu by pressing the D or C button, then selectan active mode for group cameras when an alarm isreceived by pressing the + or - button.REC+ALM: Enables alarm recording and alarm activa-tion.REC: Enables only alarm recording.The ALARM display on the monitor is also disabled.The factory default setting is REC+ALM.3. Move the cursor to the REC RATE parameter in themenu by pressing the D or C button, then select thedesired recording rate by pressing the + or - button.1 - 60FPS: Records the selected number of the freezeimage per second.The factory default setting is 15FPS.Notes:• The maximum recording rate depends on theselected parameters in the COMMON SETUP menuas shown in the table.FIELD/FRAME CAMERA GENLOCK REC RATEFIELD ON 60FPSOFF 30FPSFRAME 3DIM ON 10FPSON OFF 10FPSFRAME 3DIM ON 30FPSOFF OFF 15FPS• “FPS” indicates as field per second or frame persecond when the FIELD/FRAME parameter is set toFIELD or FRAME in the menu.4. Move the cursor to the REC QUALITY parameter bypressing the D or C button, then select the desiredimage quality by pressing the + or - button.SUPER FINE: For enhanced sharpness (CompressionRate 1/6)FINE: For fine image quality (Compression Rate 1/10)NORMAL: For normal image quality (Compression Rate1/16)EXTENDED: For extended time recording quality(Compression Rate 1/25)The factory default setting is SUPER FINE.5. Move the cursor to the PICTURE parameter by pressingthe D or C button, then select the number of freezeimages to be recorded by pressing the + or - button.4 to 60: Records the selected number of freeze imagesfor One Shot Recording.The factory default setting is 16.6. Move the cursor to the AUTO COPY parameter bypressing the D or C button, then select an alarm back-up mode by pressing the + or - button.OFF: Disables backup for alarm recording.ON: Enables backup for alarm recording.The factory default setting is OFF.7. Press the SETUP/ESC button to return to the previousprogram number menu.3-1-1-1 PROG1-NO1-G1 REC SETUPO/S(EVENT:ONE SHOT)TRIGGER ACTION REC+ALMREC MODEREC RATE 15FPSREC QUALITY SUPER FINEPICTURES 16AUTO COPY OFF