Panasonic WJ-HD500A Operating Instructions Manual

Also see for WJHD500A - Digital Disk Recorder: Operating instructions Operating instructions

Contents

Panasonic WJ-HD500A Operating Instructions Manual Manual pdf 27 page image

28POWER UP PROCEDUREBefore operating the Disk Recorder, confirm that the cam-eras and peripherals are connected correctly and securelyand all system components are turned on.1. Turn on the Disk recorder by pressing the POWERswitch located on the rear of the Disk Recorder. Makesure that the OPERATE indicator on the front panel isilluminated.2. After you completed the start, the Disk Recorder will runthrough a series of instructions for the system on theMultiscreen Monitor.3. If the Disk Recorder is powered up successfully, thedisplay as shown below appears, then the cameraimages appear on the monitor screen.[ SYSTEM CHECK ]PLEASE WAITNote:If during a system check the display shown belowappears on the monitor screen, it will be followed bythe DISK MENU after five seconds.The DISK MENU-Display indicates the status of thehard disks, and shows the causes why this menuwas called up.• Optional Extension Unit is installed [ADD]Requires disk formatting in the ExtensionUnit.• Replaced Hard Disk [✽]Requires disk formatting for a replacedHard Disk.• Detached Hard Disk [LOST]Requires disk relocation in the system.• Hard Disk malfunctions [✽]Refer servicing to qualified service per-sonnel.¢¢GB indicates the hard disk capacity.Note:If the Disk Recorder is left in this state for about fiveminutes, it will automatically restart by reconfiguring thesystem (disk remove).Normal camera images will appear on the monitorscreen.[ SYSTEM CHECK ]SYSTEM CHECK DONE!PLEASE WAITDISK MENU: [SETUP] KEY[ SYSTEM CHECK ]YOU HAVE TO CONFIGURE DISKSPLEASE WAITDISK MENUMAIN 1:¢¢GB 2:¢¢GBEXT5 1:¢¢GB 2:¢¢GB 3:¢¢GB 4:¢¢GBEXT4 1:* 2:* 3:ADD 4:ADDEXT3 1:LOST 2:LOST 3:LOST 4:LOSTEXT2 1:LOST 2:LOST 3:LOST 4:LOSTEXT1 1:- 2:- 3:- 4:-EXT0 1:- 2:- 3:- 4:-EXT DVD:-REMOVE FORMATRESTARTSELECT ITEM AND PRESS [SET] KEY