Identifying ControlsEXITOPTIONTEXTREC PROGRAMMESTTL INDEX HOLDBACK/RETURNASPECTINPUTLAST VIEWTVGUIDEVIERATOOLSVIERALinkDVD/VCR TVAVTVabc defjklghi mnotuvpqrs wxyzDIRECT TV RECMENUSD CARD1 151618192021222325262717242461135789101213148Identifying ControlsRemote ControlQuick Start Guide1 Standby On / Off switch• Switches TV On or Off standby2 [Media Player] (p. 53)• Switches to SD Card andUSB device viewing /listening mode3 [Main Menu] (p. 30)• Press to access Picture,Sound, Timer and Setup Menus4 Aspect (p. 20)• Changes aspect ratio5 Information (p. 17)• Displays channel andprogramme information6 VIERA TOOLS (p. 29)• Displays some special featureicons and accesses easily7 [VIERA Link Menu] (p. 74)8 OK• Confirms selections and choices• Press after selectingchannel positions toquickly change channel• Displays the Channel List9 [Option Menu] (p. 19)• Easy optional setting forviewing, sound, etc.10 Teletext (p. 24)• Switches to teletext mode11 Subtitles (p. 20)• Displays subtitles12 Numeric buttons• Changes channel andteletext pages• Sets characters• When in Standby mode, switchesTV On (Press for about 1 second)13 Sound Mute• Switches sound mute On or Off14 Volume Up / Down15 Input mode selection• TV - switches between DVBand Analogue modes (p. 17)• AV - switches to AV input modefrom Input Selection list (p. 27)16 Direct TV Recording(p. 72, 74)• Records programmeimmediately in DVDRecorder / VCR with Q-Linkor VIERA Link connection17 [VIERA Connect] (p. 16, 69)• Displays VIERA Connecthome screen18 Exit• Returns to the normal viewing screen19 TV Guide (p. 21)20 Cursor buttons• Makes selections and adjustments21 Return• Returns to the previousmenu / page22 Coloured buttons(red-green-yellow-blue)• Used for the selection, navigationand operation of various functions23 Hold• Freeze / unfreeze picture(p. 19)• Holds the current teletextpage (teletext mode)(p. 25)24 Index (p. 26)• Returns to the teletextindex page (teletext mode)25 Last view (p. 18)• Switches to previously viewedchannel or input mode26 Channel Up / Down27 Connected equipment operations(p. 28, 54, 76)■ Installing / removing remote’s batteries1Pull openHookCaution• Incorrect installation may cause battery leakage andcorrosion, resulting in damage to the remote control.• Do not mix old and new batteries.• Do not mix different battery types (such as alkaline andmanganese batteries).• Do not use rechargeable (Ni-Cd) batteries.• Do not burn or breakup batteries.Batteries must not be exposed to excessive heat such assunshine, fire or the like.• Do not disassemble or modify the remote control.2Note the correctpolarity (+ or -)Close