Panasonic Viera TX-P42S30B Operating Instructions Manual

Contents

Panasonic Viera TX-P42S30B Operating Instructions Manual Manual pdf 27 page image

Watching External Inputs27Watching External InputsConnect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the AV input.• To connect the equipment (p. 10, 11, 78 - 80)The Remote Control is capable of operating some functions of selected external equipment.“Operating the equipment with the TV remote control” (p. 28)TV■ To return to TVTV1 Turn the TV onWhen connecting with SCART as example 2 or 3 (p. 10, 11)Receives input signals automatically when playback starts• Input signals are automatically identified by the SCART (pin 8) terminal.• This function is also available for HDMI connections (p. 78).If input mode is not switched automaticallyPerform 2 and 3• Check the setup of the equipment.2 Display the input selection menuAV3 Select the input mode connected to the equipmentAV1AV2COMPONENTHDMI1HDMI2HDMI3TVInput SelectionSD Card/USBselectwatch• You can also select the input using the AV button on the remote controlor the side panel of the TV (except [SD Card/USB]).Press the button repeatedly until the desired input is selected.• [SD Card/USB] : Switches to Media Player “Using Media Player” (p. 53)• You can label or skip each input mode (except [SD Card/USB]).“Input Labels” (p. 48)Skipped inputs will not be displayed when the AV button is pressed.4 ViewAV1 Displays the selected modeTerminal AV1 AV2 COMPONENT HDMI1 HDMI2 HDMI3Manual input(default setting in“Input Labels”)AV1AV1-RGB AV2 COMPONENT HDMI1 HDMI2 HDMI3Auto input(EC mode orVIERA Link)EC/AV1EC/AV1-RGB − −EC/HDMI1Applicable forEC mode andVIERA LinkEC/HDMI2Applicable forVIERA LinkEC/HDMI3Applicable forVIERA Link• If the above information is permanently displayed on the top left of the screen, press the button to clear.Note• If the external equipment has an aspect adjustment function, set it to [16:9].• For details, see the manual of the equipment or ask your local dealer.