Basic Connection10Basic ConnectionExternal equipment and cables shown are not supplied with this TV.Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.Example 1 Example 2Connecting aerial Connecting DVD Recorder / VCRTV only TV, DVD Recorder or VCRRF INRF OUTRear of the TV Terrestrial aerialAC 220-240 V50 / 60 HzAerial input terminalMains lead(supplied)RF cableRF cableDVD Recorder or VCRFully wiredHDMIcompliantcableHDMI AVFully wiredSCART cableRear of the TV Terrestrial aerialAC 220-240 V50 / 60 HzMains lead(supplied)RF cableAerial input terminalMains LeadPush until both sidetabs clickMake sure thatthe mains lead issecurely fixed.To remove from the TV :tabsPress both tabs and pull on mains connector toreleaseNote• Connect to the TV’s AV1 for a DVD Recorder / VCR supporting Q-Link (p. 72).• For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3) byusing HDMI cable (p. 78).• Q-Link and VIERA Link connection (p. 70, 71)• Please also read the manual of the equipment being connected.• Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infraredsensor. Otherwise, distortion of image / sound may occur or operation of other equipment may beinterfered.Quick Start Guide