Panasonic Viera TX-P42S30B Operating Instructions Manual

Contents

Panasonic Viera TX-P42S30B Operating Instructions Manual Manual pdf 9 page image

Identifying Controls9Using the On Screen Displays - Operation guideMany features available on this TV can be accessed via the On Screen Display menu.Operation guideOperation guide will help you to operate by usingthe remote control.Example : [Owner ID]0 9* * * *Please enter new PINPINOwner IDEXIT PIN entryOperation guideHow to use remote controlMENU Open the main menuMove the cursor / select the menu item /select from a range of optionsMove the cursor / adjust levels /select from a range of optionsAccess the menu / store settings afteradjustments have been made or optionshave been setBACK/RETURN Return to the previous menuEXIT Exit the menu system and return to thenormal viewing screenAuto power standby functionThe TV will automatically go to Standby mode in the following conditions:• no signal is received and no operation is performed for 30 minutes in Analogue TV mode• [Off Timer] is active in the Timer Menu (p. 19)• no operation is performed for the period selected in [Auto Standby] (p. 34)• This function does not affect the recording of Timer Programming and Direct TV Recording.Quick Start GuideTV1 CI slot (p. 51)2 Function select• [Volume] / [Contrast] / [Brightness] / [Colour] /[Sharpness] / [Tint] (NTSC signal) / [Bass]∗ /[Treble]∗ / [Balance] / [Auto Setup] (p. 40)∗[Music] or [Speech] mode in the Sound Menu3 Channel Up / Down, Value change (when usingthe F button), Switching the TV On (press eitherbutton for about 1 second when in Standby mode)4 Changes the input mode5 USB 1 / 2 port (p. 80)6 SD Card slot (p. 53)7 HDMI3 terminal (p. 80)8 Headphones jack (p. 80)9 AV2 terminals (p. 80)10 Mains power On / Off switch• Use to switch the mains power.If you turned the TV Off during Standbymode by the remote control last time, the TVwill be in Standby mode when you turn theTV On with Mains power On / Off switch.11 Remote control signal receiver• Do not place any objects between the TV remotecontrol signal receiver and remote control.12 C.A.T.S. (Contrast Automatic TrackingSystem) sensor• Senses brightness to adjust picture qualitywhen [C.A.T.S.] in the Picture Menu is set to[On] (p. 31)13 Power and Timer LED•Red : StandbyGreen : OnOrange : Timer Programming OnOrange (flash) :Recording of Timer Programming orDirect TV Recording in progressRed with orange flash :Standby with Timer Programming Onor Direct TV Recording• The LED blinks when the TV receives acommand from the remote control.11 12 1391012345678