Panasonic Viera TX-L32G20BA Operating Instructions Manual

Contents

Panasonic Viera TX-L32G20BA Operating Instructions Manual Manual pdf 91 page image

Link Functions(Q-Link / VIERA Link) Advanced91Features available (Using VIERA Link Menu)NoteThese functions may not work properly depending on the connected equipment. Image or sound may not be available for the first few seconds when Input mode is switched. Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplifier. Read the manual of the equipment.“HDAVI Control 5” is the newest standard (current as of December, 2009) for HDAVI Control compatible equipment. This standard is compatible with conventional HDAVI equipment.To confirm this TV’s version of HDAVI Control “System Information” (p. 36)Speaker control Speaker SelectionYou can control the home theatre speakers with this TV remote control (point the remote control atthe TV’s signal receiver).If you cannot control the home theatre speakers with this remote control, check the settings and the equipment“Summary of Q-Link and VIERA Link features” (p. 84 and p. 85), “Preparations” (p. 87)Access and control the speaker volumeTV1 Display “VIERA Link Menu”2 Select “Speaker Selection”VIERA Link MenuPause Live TV StartDirect TV RecVIERA Link ControlSpeaker SelectionStartRecorderHome Cinema select3 Set to “Home Cinema” or “TV”setHome CinemaThe Player theatre, Blu-ray Disc theatre or Amplifier will beautomatically turned on if it is in Standby mode and the soundwill be output from theatre speakers connected to the equipment.Volume up / downMuteThe sound of the TV speakers is muted.When the equipment is turned off, the TV speakers will be activated.TVTV speakers are active.NoteIf you wish to enjoy multi-channel sound (e.g. Dolby Digital 5.1ch) via an Amplifier, connect the Amplifier to the TV with an HDMI cable and an Opticaldigital audio cable (p. 85), and then select “Home Cinema”. If your Amplifier has“HDAVI Control 5” function, you only need to connect with an HDMI cable. In thiscase, connect your Amplifier to the TV’s HDMI2 terminal.To enjoy the sound from the DIGA Recorder in multi-channel sound, connect anHDMI cable from the DIGA Recorder to the Amplifier (p. 85).