Panasonic Viera TX-L32G20BA Operating Instructions Manual

Contents

Panasonic Viera TX-L32G20BA Operating Instructions Manual Manual pdf 52 page image

NoteCheck that the LED is orange. If not, timer programmes are not active or not stored. Timer Programming reminder messages will remain displayed until one of the following occurs: You press the OK button to view the programme or the EXIT button to cancel the reminder.•The timer programming event that the reminder is set for ends.•“!” identifies that any timer programming events have overlapped. “Ext Rec.” and “USB HDD Rec.” are given priority over “Reminder”. When two or more “Ext Rec.” / “USB HDD Rec.” overlap, the first timer programmingevent starts and finishes as programmed. The next timer programming event will then start.2 mins. before the starting time, a reminder message appears if you are watching TV.To remove the message and start the programme• To cancel the Timer Programming• EXITThe recording of Timer Programming will automatically change to the programmed channel 10 seconds before the start time.To stop recording of the timer programming event, it may be necessary to stop the recorder manually. The recording of Timer Programming will be performed even if the TV is in Rewind LIVE TV recording (p. 65) and Pause Live TV recording (p. 89). In this case, these recordings will be cancelled.TEXT STTL INDEX HOLDDIRECT TV RECNOPTION BACK/RETURNVIERATOOLSASPECTAVEXITINPUTGUIDETVMENU52Timer ProgrammingTimer Programming from MenuThe Timer Programming menu allows you to choose programmes that you wish to remind watchingor record to the external recorder or the USB HDD. At the correct time, the TV will tune to the correctchannel automatically to record even if the TV is in Standby mode.TV Guide may also be used to set timer programming event (p. 22) .Timer Programming can store up to 15 events. For recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed, the TV must be On.No other channel can be selected while the recording of Timer Programming is in progress. It may not be possible to record an encrypted programme (which is copy-protected). When recording programmes to the external recorder, be sure to make the proper settings on the recorder connected to the TV.If a compatible recorder with Q-Link or similar technologies is connected to the TV (p. 86) and the “Link Settings”(p. 34) are correct, no setting of the recorder is required. Also read the manual of the recorder.If the recorder is not compatible with Q-Link or similar technologies, set “Q-Link” in the Setup Menu (p. 34) to the connected terminal (AV1 or AV2), and set the timer of the recorder in addition to the Timer Programming on theTV. For preparations of a recorder, read the manual of the recorder.When recording programmes to the USB HDD, be sure to register the USB HDD and enable it for recording in the “USB HDD Setup” (p. 62).Recordings are always in standard definition composite video via SCART, even if the original programme is in high definition.1 Select the tuner you want to usep. 16TV2 Display the menuMENU3 Select “Setup”Main MenuPictureSoundSetupaccessselect4 Select “Timer Programming”Setup Menu 1/2Child Lockfreesat Tuning MenuOther Sat. Tuning MenuDisplay SettingsNetwork SetupAccessOffUSB HDD SetupLink SettingsOff TimerTimer Programmingaccessselect5 SetTo return to TV EXITTo unlock the tuner (stop recording)GUIDEEXIT