Accessories / OptionsQuick StartGuide7Attaching the pedestalTo help avoid risk of damage or injury by the TV tipping or falling, please follow the warnings andcautions below:WarningDo not disassemble or modify the pedestal.CautionDo not use with any other TVs or displays. Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer immediately.During setup, make sure that all screws are securely tightened. Ensure that the TV does not suffer any impact during installation of the pedestal. Ensure that children do not climb onto the pedestal. Install or remove the TV from the pedestal with at least two people.Assembly screw (4)XSS4+16FNK Assembly screw (4)XYN4+F12FJK Bracket (1)TUX0EA004 (TX-L32G20BA)TUX0E198 (TX-L37G20BA)Base (1)TBL0E0110 (TX-L32G20BA)TBL0E0111 (TX-L37G20BA)Assembling the pedestalUse the four assembly screws to fasten the bracketto the base securely.Forcing the assembly screws the wrong way will strip the threads.Make sure that the screws are securely tightened.ACDFrontSecuring the TVUse only the supplied assembly screws to fastenthe pedestal securely to the TV.Make sure that the screws are securely tightened. Carry out the work on a horizontal and level surface.B BFoam mat or thick soft clothAdjust the panel to your desired angleEnsure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range. Do not place any objects or hands within the full rotation range.15°ab15°(View from the top)TX-L32G20BA a: 358 mm / b: 230 mmTX-L37G20BA a: 399 mm / b: 296 mmSet the mark at the centre as illustrated, toensure full degree rotation in either direction.NoteVisible part of the pedestal will remain parallel to the TV even when rotated.