Using Media Player AdvancedDIRECT TV RECNASPECTTEXT STTL INDEX HOLDGUIDEVIERATOOLSINPUTTV AVSD CARDEXITBACK/RETURNMENU67Change the deviceYou can change to the other device directly in the same mode if two or more devices are connected.Displaythe menuMENUSelect “Drive Select” Select the icon you want to access toMain MenuPictureSoundPhoto SetupVideo SetupMusic SetupDrive SelectSafely remove USB Appears if the USB deviceis connected to the TV.selectaccess Media PlayerSD CardDrive SelectEXITRETURNSelectAccessselected device nameaccessselectRemove the USB devices safelyBefore remove the USB devices, please take the following steps in order to protect the devices.Displaythe menuMENUSelect “Safely remove USB” Select the USB Flash Memory or USB HDD to removeMain MenuPictureSoundPhoto SetupVideo SetupMusic SetupDrive SelectSafely remove USB Appears if the USB deviceis connected to the TV.selectaccess Safely remove USBNameProductUSB Flash DiskselectsetStarting Media PlayerTo return to TV EXITor SD CARDTo return to the previousscreenBACK/RETURN1 Insert the SD Card or USB Flash MemoryFor registered USB HDD, ensure the connection status is “Yes”. p. 632 Switch to Media PlayerSD CARD When SD Card is inserted, switching will be done automatically.3 Start Media PlayerMedia PlayerSignal output from all AV terminals will bedisabled during Media Player view.Press OK to proceed.Press EXIT to return to TV viewing.4 Select the icon you want to access toMedia PlayerSD CardDrive SelectEXITRETURNSelectAccessselected device nameaccessselectIf two or more devices are not connected, this step will be skipped.For the registered USB HDD, all the USB HDD of which the connection status is“Yes” is available.“Register and setup the USB HDD”(p. 63)5 Select the contentMedia PlayerPhoto Video MusicSD CardContents SelectEXITRETURNSelectAccessaccessselectFor registered USB HDD, this step will be skipped and recorded contents list will bedisplayed. p. 71Photo “Photo mode” (p. 68)Video “Video mode” (p. 70)Music “Music mode” (p. 73)