Watching TVBasic19Other useful functionsDisplay the selectable settings for the current statusCheck or change the currentstatus instantlyOPTIONTo changechangeselectMulti Audio / AD (freesat mode)Allows you to select between alternative languageor Audio Description for sound tracks (if available)Set Audio Description “Auto” in the Sound Menu (p. 33) to select the audio description sound track.In freesat mode, Audio Description cannot becontrolled separately from the audio descriptionsound track.This setting is not memorized and it will return to the default setting once you exit the current programme.Multi Audio (DVB or Other Sat. mode)Allows you to select between alternative languagefor sound tracks (if available)This setting is not memorized and it will return to the default setting once you exit the current programme.Monaural Audio (DVB mode)Allows you to select stereo / monaural (if available)This setting is not memorized and it will return to the default setting once you exit the current programme.Subtitle Language(freesat, DVB or Other Sat. mode)Allows you to select the language in which subtitlesshould appear (if available)This setting is not memorized and it will return to the default setting once you exit the current programme.NICAM (Analogue mode)Switches NICAM sound (if available)Sound Menu (p. 33)Volume CorrectionAdjusts volume of individual channel or input modeAudio Description (DVB mode)Set to “Auto” if the programme has Audio Descriptionservice, then you will hear an additional audio track todescribe events on screenTo adjust the volume for Audio Description “Audio Description Menu” (p. 33)Safely remove USBTakes this operation to remove the connected USB device safely from the TV.NoteAlso possible to change the settings in Menu list (p. 32 - 36).Last viewSwitch to previously viewedchannel or input mode easily LAST VIEWPress again to return to the present view.NoteSwitching channel is not available while the recording of Timer Programming, Direct TV Recording or One Touch Recording is in progress.Watching less than 10 sec. is not regarded as the previously viewed channel or input mode.Off TimerTurn the TV off automatically after a fixed period (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)Display the menu Select “Setup” Select “Off Timer” and set the timeMENU Main MenuPictureSoundSetupaccessselectSetup Menu 1/2Off Timer OffLink SettingsChild Lockfreesat Tuning MenuOther Sat. Tuning MenuDisplay SettingsNetwork SetupUSB HDD SetupTimer ProgrammingsetselectTo cancel Set to “Off” or turn the TV off.To display the remaining time Information banner (p. 17)NoteWhen the remaining time is within 3 minutes, the remaining time will flash on the screen.