2/2SET UPMULTI DISPLAY SETUPMULTI PIP SETUPPORTRAIT SETUPSET UP TIMERPRESENT TIME SETUPDISPLAY ORIENTATION LANDSCAPE29PRESENT TIME SETUP / SET UP TIMERPRESENT TIME SETUPThe timer can switch the Plasma Display ON or OFF.Before attempting Timer Set, confirm the PRESENT TIME OF DAY and adjust ifnecessary. Then set POWER ON TIME / POWER OFF TIME.Press to display the SET UP menu.Press to select SET UP TIMER orPRESENT TIME SETUP.Press to display the SET UP TIMER screen or PRESENT TIME SETUP screen.2112Press to select POWER ON TIME / POWER OFF TIME.Press to set up POWER ON TIME / POWER OFF TIME.button: Forwardbutton: BackNotes:• Pressing “ ” or “ ” button once changes POWER ON TIME/ POWER OFF TIME 1 minute.• Pressing “ ” or “ ” button continuously changes POWER ON TIME / POWER OFFTIME by 15 minutes.Press to select POWER ON FUNCTION / POWER OFF FUNCTION.Press to select ON.Note:Timer function will not work unless “PRESENT TIME OF DAY” is set.21SET UP TIMERPress to select DAY or PRESENT TIME OF DAY.Press to set up DAY or PRESENT TIME OF DAY.button: Forwardbutton: BackNotes:• Pressing “ ” or “ ” button once changes PRESENT TIME OF DAY 1 minute.• Pressing “ ” or “ ” button continuously changes PRESENT TIME OF DAY by 15 minutes.Press to select SET.Press to store PRESENT TIME SETUP.Notes:• SET cannot be selected unless PRESENT TIME OF DAY is set.• Unless setting the present time other than “99:99”, DAY setting is invalid.• The settings of “DAY” and “PRESENT TIME OF DAY” are reset when leaving the displayturned off for about 7 days for the following reasons:Pressing switch of the unit to turn off the display.Disconnecting the AC cord.Interruption of power supply.99:99MONPRESENT TIME SETUPPRESENT TIME OF DAY MON 99:99SETPRESENT TIME OF DAYDAY0:000:00SET UP TIMERPOWER OFF FUNCTIONPOWER ON FUNCTION OFFOFFPRESENT TIME OF DAY 99:99POWER OFF TIMEPOWER ON TIME