Panasonic Viera TH-58PF11 Operating Instructions Manual

Also see for TH-65PF11UK - 64.8" Plasma Panel: Specifications Operating instructions manual Service manual Operating instructions manual

Contents

Panasonic Viera TH-58PF11 Operating Instructions Manual Manual pdf 27 page image

27PICTURE AdjustmentsADVANCED SETTINGSNotes:• “COLOR” and “TINT” settings cannot beadjusted for “RGB/PC” and “Digital” inputsignal.• You can change the level of each function(PICTURE, BRIGHTNESS, COLOR, TINT,SHARPNESS) for each PICTURE MENU.• The setting details for STANDARD, DYNAMICand CINEMA respectively are memorizedseparately for each input terminal.• The “TINT” setting can be adjustedfor NTSC signal only during “VIDEO(S VIDEO)” input signal.• In PICTURE, there is not a noticeable changeeven when contrast is increased with a brightpicture or reduced with a dark picture.On the remote control unit, while the “ADVANCED SETTINGS” menu is displayed, if either the N button is pressed at any timeor the ACTION ( ) button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.Helpful Hint ( / NORMALIZE Normalization)Item Effect AdjustmentsPICTURE Less More Adjusts the proper picture contrast.BRIGHTNESS Darker BrighterAdjusts for easier viewing of darkpictures such as night scenes andblack hair.COLOR Less More Adjusts color saturation.TINT Reddish Greenish Adjusts for natural flesh tones.SHARPNESS Less More Adjusts picture sharpness.Item Effect DetailsBLACKEXTENSION Less More Adjusts the dark shades of the image in gradation.INPUTLEVEL Less MoreAdjustment of parts which are extremely bright and hard to see.(This cannot be adjusted when the input signal is Digital.)GAMMA Down UpS CURVE 2.0 2.2 2.5 2.6** When 2k1k signals are received with the Dual Link HD-SDI Terminal Board (TY-FB11DHD), GAMMA “2.6” can also be selected.AGC OFF ON Increases the brightness of dark signal automatically.W/B HIGH R Less More Adjusts the white balance for light red areas.W/B HIGH G Less More Adjusts the white balance for light green areas.W/B HIGH B Less More Adjusts the white balance for light blue areas.W/B LOW R Less More Adjusts the white balance for dark red areas.W/B LOW G Less More Adjusts the white balance for dark green areas.W/B LOW B Less More Adjusts the white balance for dark blue areas.Notes:• Carry out “W/B” adjustment as follows.1. Adjust the white balance of the bright sections using the “W/B HIGH R” , “W/B HIGH G” and “W/B HIGH B” settings.2. Adjust the white balance of the dark sections using the “W/B LOW R” , “W/B LOW G” and “W/B LOW B” settings.3. Repeat steps 1 and 2 to adjust.Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.• The adjustment values are memorized separately for each input terminal.• The adjustment range values should be used as an adjustment reference.