52On Screen Messages Actions / MeaningsAll tuning data will be erased ”Shipping condition” will erase all tuning data.Are you sure? Confirm that this is the correct operationBad Signal The signal is weak. Check the aerial.Are you sure you want to delete this timer ?Press OK to delete timerPress Exit to returnConfirm that this is the correct operationDOWNLOAD IN PROGRESS PLEASE WAIT Q---Link channel download is in progress.DVB Tuner LockedThis programme is locked for recordingIf you want to unlock, cancel Direct TV Recording (p.36) or Timer Programming (p. 34).Feature not available Check the Q---Link connection and setting (p. 39).Confirm that you are not trying to record from anunsuitable source (i.e. Component / HDMI / PC).Incorrect PIN Number The PIN number you entered is wrong.Invalid DVB Channel Invalid DVB channel is selected.Invalid system time. Please exit ! Cannot get the time information.Check the connection of the RF cable.Max number of Timer already set ! Max number of Timer already set !New DVB Service Found!Press OK start Auto SetupPress EXIT to Ignore.Warning! Selecting Auto Setup will deletecurrent Profile and Childlock settingsThere is a new DVB station. (p. 35)New version 1.90 found.Do you really want to update thesoftware and reboot the system ?Press OK to download the new versionPress EXIT to IgnoreThere is a new software available. (p. 38)No DVB Service found No DVB signal can be found in Auto Setup.No module inserted Check the CI module inserted completely (p. 25).No recording ---Check Tape or Disc The tape or disc may be ”write protected”, missing ordamaged.The equipment may already be recording.No recording --- UNKNOWN REASON The recording cannot be made. Check the equipment.Disc or tape may be full.No Service The station has stopped the services.No Signal Check the connection of the RF cable.ON SCREEN MESSAGES