53On Screen Messages Actions / MeaningsPlease check aerial or localDVB service availability.Press OK to start Auto SetupPlease follow the message.If it still fails, consult your local Panasonic dealer.Please check settings and connections on HDMIdevices.Communication error with Control on HDMI function(p. 46)No stations found Please insert the aerial No analogue signal can befound in Auto setup.Please wait. A function is in progress.Recording in progress The recording equipment is recording the programmesignal from its own tuner. You can turn the TV off andleave the equipment recording in the normal way.Recording stopped --- TV source changed Direct TV recording (analogue mode) will stop if chan-nel or input source is changed.Software successfully updated Press EXIT to continueThe software updating is finishedSoftware Update failed. Please try again later.Press EXIT to continuePerform ”System Update Search Now” inSystem Update (p. 38).If it is still failed, there may not be any new software.This service is locked!Press OK to enter PINThe selected channel is locked in Child Lock (p. 34).Timer already expired ! Starting time in Timer Programming is already past. Setcorrectly (p. 31).Timer Event Due to Start1: BBC1 has beenProgrammed for recording at 20:00This message will appear 2 minutes before timer pro-gramming event due to start.Timer incorrect ! Set Starting and Ending times in Timer Programmingcorrectly (p. 31).Timer overlap! The timer programme events are overlapped. Cannotrecord other channel at the same time. Check the Start-ing and Ending times in Timer Programming (p. 31).Unable to download, Check Equipment The tape or disc is active. Stop the equipment and tryagain.WARNINGAll analogue tuning data will be erasedAuto setup will erase all present analogue tuning data(p. 25).WARNINGAll digital tuning data will be erasedDVB Auto Setup will be erased all present DVB tuningdata (p. 35).ON SCREEN MESSAGES