Panasonic VIERA TX-26LXD6 Operating Instructions Manual

Also see for TX-23LXD60: Quick start guide

Panasonic VIERA TX-26LXD6 Operating Instructions Manual Manual pdf 31 page image

31For an external recording device to record DVB programmes, the integrated DVB system must be active to providethe signal. The Timer programming menu allows you to choose programmes that you wish to record. At the correcttime, the DVB system will switch on and tune to the correct station (even if the TV is in standby mode). If therecording device is compatible with Q---Link or similar technologies (see page 39) and connected to the TV’s AV1 /AV2 terminal, you do not need to program the device --- the DVB system will control the recording process.The device must be connected to the TV’s AV1 / AV2 terminal using a SCART cable to record DVB programmes.In DVB modePress the MENU button.Move to Setup menu.Access Setup menu.Move to DVB Setup Menu.Access DVB Setup Menu.Move to Timer Programming.Access Timer Programming.Press the OK button to begin programming.Select the Programme position to be recorded.Move to the Date field.Set the date on which the recording is to take place.The current Date and Time are shown at the top ofthe menu. See page 32 for further Date options.Move to the Start time field and set the Start time.Move to the End time field and set the End time.The duration of the recording is shown in the min. column.The channel position, start and end times can also beinput using the numeric buttons on the remote control.Move to the Subtitles field.If you wish to record subtitles (if available) select Auto.Press the OK button to store.Press the EXIT button to leavethe DVB Timer Programming screen.Notes:STo delete a timer programme, select the recording with the cursor bar and press the Red button.STo edit a previously entered timer programme, select it with the cursor bar and press the OK button.STimer programmes can also be entered from the TV Guide.Two minutes before the recording is due to start, a reminder will appear on screen: Press the OK button to removethe reminder from the screen. If you wish to cancel the recording, press the EXIT button.Notes: The above 2 operations will not be necessary if the TV set is in standby mode.Six seconds before the recording is due to start the DVB system will tune to the correct station. If you were already watching anotherDVB station you will see the station change on screen. If you were watching an analogue channel, you will not see the change.You can continue to watch analogue stations while a timer recording is in progress. If you attempt to switch to another DVBprogramme position while a timer recording is in progress the message “DVB Tuner Locked “will be displayed. Press the OK buttonto continue recording, or EXIT to unlock the programme position. Beware that if you press EXIT, timer programming for this DVBposition will be immediately deleted. To immediately cancel a recording that is already in progress, press GUIDE then EXIT.Timer programming menu (DVB mode)MENUEXIT