VG-M186DEMERG.FIRE WINDOW POWERPUSH DOOR ABSENTHANDS FREESTOPALRM DISPLAYVG-M186DEMERG.FIRE WINDOW POWERPUSH DOOR ABSENTHANDS FREESTOPALRM DISPLAYThis button is pressed when newinformation is displayed or a functionis started.The basic operation displays andoperation buttons appear on themonitor screen.Press this button to confirm thatthere is a fire after you hear theautomatic fire alarm.Monitor Screen (Touch Panel)Display ButtonThis button is pressed to stop thealarm sound.Stop Alarm ButtonEmergency ButtonFire Confirmation ButtonHandsetSpeakerINTRODUCTIONThis indicator flashes whena fire is detected, and lightscontinuously if the detectorbecomes disconnected.Fire IndicatorThis indicator is lit during a windowsecurity alert. This indicator flashes whensecurity sensor 1 has been activated.Window Security Alert IndicatorThis indicator is lit while the FoyerSecurity Alert is active, and flasheswhile security sensor 2 is active.Foyer Security Alert IndicatorThe main power supply to the IndoorMaster can be turned OFF with a specialbreaker. The power indicator turns OFFwhen the main power supply is turnedOFF. (This breaker will not operate if thepower indicator is turned OFF.)Power IndicatorThis indicator lights when the AwayMode is used, and flashes during thefoyer security alert delay time.Away IndicatorThis indicator flashes when there isa message from the manager, avideo image from the lobby, or newinformation. It lights when the numberof saved records reaches the maximum.Display IndicatorThis indicator flashes while an alarmsounds. It goes OFF when the StopAlarm Button is pressed.This indicator is litwhile talking using thehands-free function.Talk IndicatorThis indicator flasheswhile the detector isbeing activated.Fire Confirmation IndicatorHands-free MicrophoneHands-free ButtonStop Alarm Indicator10 11Part Names and Functions Part Names and FunctionsButtons IndicatorsTouch Panel OperationsOperate the touch panel using your fingers.Do not use objects with a sharp and hard end, such as a pen or a mechanical pencil.(Doing so may scratch the screen surface.)Do not apply excessive weight on the touch panel.(The touch panel may crack.)* If the touch panel cracks it can become a cause of injury. Do not touch the product with your barehands. Contact customer assistance. (Refer to page 111).If the touch panel stops responding well, readjust the touch positions. (Refer to page 96.)Hands Free CommunicationsWait for the other person to finish talking before you talk. (The voice may be interrupted.)Talk near enough to the microphone to make the Talk Indicator light while you are speaking(50 cm or less from the microphone).The conversation may be interrupted if there is loud ambient noise.