Use the Button to turn ON a device,such as an air conditioner, and use theButton to turn it OFF.will be displayed for the button when thedevice is ON and will be displayed whenthe device is OFF.The ON/OFF status will toggle when the Equip.Button is touched.70 71TOP MENU OPERATIONSEquipment Control1Equipment ON/OFF Settings Such as IconsLocking and Unlocking the Electric Key1Touch the Button to lock the door andtouch the Button to unlock the door.The Button will be displayed when thedoor is locked and the Button will bedisplayed when it is unlocked.The lock/unlock status will toggle when theElectric Key Button is touched.NoticeNetwork FunctionsThe network functions include the following three functions.Basic Display Configuration of Network FunctionsBasic MailInformationServiceNoticeNoticeNotice The information display area shown in this document is only a sample. The actual display may be different.Here, an example with Japanese text is shown.This function enables exchanging basic mail between dwelling units.This function enables viewing local information (such as public information,time tables, etc.) on the monitor.Fax services* can be viewed.* Fax services provide information such as bargain sales in local stores.Apartment administration information from the administrating company canbe viewed on the monitor.Examples: Elevator inspection dates or garbage collection days1.2.3.InformationDisplay Area Operation AreaBasic mail,information service,notice, etc.Functions suchas scroll theinformation displayarea and registeringNETWORK FUNCTIONSTouch the Equip. Button on the TopMenu.Touch the Electric Key Button on theTop Menu.The devices that can be controlled (electric keys for dwelling units, or other devices) are determined by theinstallation settings.An Expansion Adapter must be connected in order to use the device control function.(The Equip. Button will not be displayed if an Expansion Adapter is not connected.)Video and sound cannot be attached. It is also possible to send and receivemail from the Internet. (There are partial restrictions for sending.)(When mail is sent, your own address is provided to the receiving party.)Network functions will be interrupted if a visitor arrives or a fire alarm occurs.Some of the information in the Information Service and Notice functions depend on the region.Depending on the network conditions, it may take time for mail to be received or for sent mail to be delivered.Information display area (and sometimes part ofthe operation area)Operation areaLeft side of display:Right side of display:Touch Panel OperationTouch the display briefly and then remove yourfinger.There is no "Pi" sound when the display is touched.* Even when sounds are set in the settings, thereare no sounds for operations.(Refer to Setting Operation Sounds on page 98.)Note To use this function, a separate network service contract with the apartment building is required.